Description
- TPR injection molding fully automatic production line.
(1) Automatic feeding and plasticizing preheating.
(2) Automatic weighing and injection of rubber materials
(3) Automatic seat in, seat out
(4) Automatic vacuum or exhaust.
(5) Automatic mold in/out and mold opening.
- High production efficiency of the machine, very cost-effective
(1)Compared with the traditional hydraulic press, the production capacity is doubled/single die
(2)Save labor (50%-70%)
(3)Save electricity (50%-60%)
(4) Save materials (5%-10%)
- Seamlessly linking the old hydraulic presses, upgrading is more convenient
(1) Formula does not change: directly use the original formula, no need to re-development
(2) Material does not change: directly use the original rubber material, no need to re-development
(3) Molds do not change: save the cost of secondary development of molds.
(4) Production process does not change: no need to replace the process.
- Good product quality, realize the hand tearing burrs
(1)Good details of product surface effect, uniform density
(2)It can be applied to all the molds of the traditional hydraulic machine to realize the fineness of the hand-torn edge material.
(3)The product directly hand tearing burrs, save the subsequent process
| Technical Parameters | |||
|---|---|---|---|
| MODEL | UNIT | RB parameters | TPU parameters |
| Number of work station | Stations | 5 | 1 |
| Screw Diameter | mm | ∮75 | ∮32 |
| Max.injection volume | cm³ | 1368 | 280 |
| Max.injection pressure | Kgf/cm² | 1950 | 3000 |
| Mould clamping force | Tons | 200 | 200 |
| Mould space(L×W×H) | mm | 500*490*220 | 500*490*500 |
| Pad(L×W×H) | mm | 无 | 380x450x150 |
| Hot plate size | mm | 470*450 | 无 |
| Motor | Kw | 18.5*2 | 18.5*1 |
| TesWting bands power | Kw | 50KW+9KW（mold temperature controller） | 3KW (barrel heating) |
| Runner plate | block | YES | NO |
| Weight(Approximate) | tons | 22T | |
| Testing bands power | Kw | 128(will not start at the same time) | |
