Description
The TS Series Toggle Hydraulic Injection Molding Machine adopts advanced oil circuit design and is equipped with a professional controller, which enables stable machine movement, high product yield, and fast response speed. At the same time, the oblique row double injection cylinder and linear guide rail are used to make the glue injection more accurate and stable. The screw is made of high-performance nitrided steel, which is durable and efficient, and has wider applications.
Hydraulic System:
-
- Controlled by four sets of servo motors.
- Flow rate of 100L/min.
- Features stable pressure, precise adjustment, energy efficiency, and durability.
- Heat Insulation and Heating System:
- Includes a complete set of plates: upper heat insulation plate, cold runner plate, middle heat insulation plate, upper heating plate, lower heat insulation plate, and lower heating plate.
- Vacuuming Device:
- Vacuuming time is individually controlled.
- Optional multi-stage exhaust program for enhanced control.
- Mold Clamping and Opening:
- Clamping and opening pressure, speed, and stroke are all controlled separately for precision.
- Vulcanization Control:
- Both vulcanization time and temperature are independently controlled.
- Injection Control:
- Injection material volume, pressure, time, speed, and the number of injection segments are all controlled separately for high precision.
- Injection Table:
- Utilizes a large oil cylinder with double-cylinder injection for strong injection force and stable, reliable injection volume.
- Clamping Cylinder:
- Designed with a precision-cast composite cylinder for large clamping force, resulting in less burr on the product.
- Barrel Temperature Control:
- Controlled by a mold temperature machine for fast heating and cooling, with precise temperature regulation.
| Technical Parameters | |||
|---|---|---|---|
| NUMBER | MODEL | UNIT | parameters |
| 1 | Number of work station | Stations | 6 |
| 2 | Productivity per hour | Pairs | 90-180（mold/hour） |
| 3 | Screw Diameter | mm | ∮65 |
| 4 | Max.injection volume | cm³ | 1080 |
| 5 | Max.injection pressure | Kgf/c㎡ | 2200 |
| 6 | Mould clamping force | Tons | 180 |
| 7 | Mould space(L×W×H) | mm | 450*380*220 |
| 8 | Motor | Kw | 18.5+15*2 |
| 9 | Testing bands power | Kw | 36KW+9KW（mold temperature controller） |
| 10 | Weight(Approximate) | tons | 13T |
| Note | The maximum injection volume is calculated on the basis of a specific gravity of 1.18-1.20. | ||
